Mercedes-Benz CL-Class 2007 - Manual (Page 329)

328
Controls in detail
Locking and unlocking
Important notes on using KEYLESS-GO
ț You can also use the SmartKey with
KEYLESS-GO like a normal SmartKey
(
୴ page 322).
The starter switch is located under the
KEYLESS-GO button. Pull the
KEYLESS-GO button out in order to ac-
cess the starter switch.
ț You can combine KEYLESS-GO func-
tions with normal SmartKey functions
(e.g. unlocking with KEYLESS-GO and
locking with button
‹).
ț Always carry the SmartKey with
KEYLESS-GO with you.
ț Never store the SmartKey with
KEYLESS-GO together with:
ț Electronic items such as a mobile
phone or another SmartKey with
KEYLESS-GO
ț Metallic objects such as coins or
metal foil
Doing so could impair the function of
the KEYLESS-GO system.
ț To lock or unlock the vehicle, the
SmartKey with KEYLESS-GO must be
located outside the vehicle within ap-
proximately 3 ft (1 m) of a door or the
trunk lid.
ț If the vehicle has been parked for more
than 72 hours, you must pull an outside
door handle in order to activate the
KEYLESS-GO function.
ț In order to start the engine with the
SmartKey with KEYLESS-GO:
ț The SmartKey with KEYLESS-GO
must be located in the vehicle.
ț The KEYLESS-GO start/stop button
must be inserted in the starter
switch (
୴ page 337).
ț The brake pedal must be firmly de-
pressed. Do not depress the accel-
erator.
ț If the SmartKey with KEYLESS-GO is
positioned farther away from the vehi-
cle, the system may no longer recog-
nize the SmartKey with KEYLESS-GO.
The vehicle then cannot be locked or
the engine started via the KEYLESS-GO
system.
ț If the SmartKey with KEYLESS-GO is re-
moved from the vehicle (e.g. if passen-
ger exits the vehicle with the SmartKey
with KEYLESS-GO)
ț when pressing the KEYLESS-GO
start/stop button or trying to lock
the vehicle with the outside door
handle the message
“Key not recognized” appears in the
multifunction display
ț with the engine running, the mes-
sage “
Key not recognized ” appears
in the multifunction display while
driving off