Rice Lake IQ plus 2100SL Digital Bench Scale - Manual (Page 15)

Configuration 17
3.2.3 Calibration Menu
See Section 4.0 on page 20 for calibration procedures.
Figure 3-8. Calibration Menu
CALIBR Menu
Parameter Choices Description
Level 2 submenus
WZERO — Display and edit the zero calibration A/D count value.
WVAL — Display and edit the test weight value.
WSPAN — Display and edit the span calibration A/D count value.
REZERO — Press ENTER to remove an offset value from the zero and span calibrations.
Use this parameter only after WZERO and WSPAN have been set. See Section 4.1 on
page 20 for more information about using this parameter.
Table 3-4. Calibration Menu Parameters
WZERO
*CAL*
Display and edit
zero calibration
A/D count value
Display and edit
test weight value
WVAL
*CAL*
Display and edit
span calibration
A/D count value
WSPAN
* CAL*
Press Enter to
remove offset from
zero and span
calibrations
REZERO
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT