0 printer configuration, 1 introduction to setup, 1 entering setup – Rice Lake TicketPress - Installation and Operation Manual User Manual
Page 12: 2 selecting a menu, Printer configuration, Entering setup, Selecting a menu
8
TicketPress
Operator’s Manual
4.0
Printer Configuration
4.1
Introduction To Setup
The
TicketPress
printer features simple, easy to use menus for setting the various interface and operating
parameters. These parameters usually only need to be set once at the time of installation. These values are stored
in nonvolatile memory, which means that they will remain set even if the printer is turned off.
Note
The value that is last displayed before advancing to the next item is the value that will be saved
when Setup mode is exited.
Figure 4-1. Control Panel Setup Buttons
4.1.1
Entering Setup
1. To enter Setup, with printer on.
2. Press and hold
.
Entering Setup Menus
is displayed as shown below.
Entering
Setup Menus
4.1.2
Selecting a Menu
After the above message has been shown, the display will show the first menu choice available, which is the
OPTIONS
menu as shown below.
Options
To cycle through the available menus, press
. This will advance you to the
INTERFACE
menu, the
Exit
Setup Menus
choice, and back to the
OPTIONS
menu.
Options
Interface
Exit Setup Menu
Save Changes