2 interface menu, 4 interface menu, Interface menu – Rice Lake TicketPress - Installation and Operation Manual User Manual
Page 22
18
TicketPress
Operator’s Manual
4.3.2
Interface Menu
This item selects whether items in the INTERFACE menu can be edited or only
viewed by the operator.
Interface
Edit Allowed
Value
Action
Edit Allowed
*
Allows edits to be made.
View Only
Options can only be viewed by operator.
Initialize
Reset the value of all the items for all interfaces to factory default values.
4.4
Interface Menu
The INTERFACE menu is used to configure the various operating modes, current
time and date, and ticket ID values of the
TicketPress
. Enter Setup and select the
INTERFACE menu as describe earlier.
Double Strike
Off
Value
Action
RS-422
Selects whether the standard RS-232 interface or the installed optional interface is active.
Data will only be transmitted/received through the active interface.
20 mA Current Loop
RS-232
Note
Note
When entering the Interface menu, the first thing that must be done is selection of the
communication type. If it is not selected at this time, and a change must be made, it will be
necessary to exit and then re-enter the Interface menu to select a different communication type.
This menu item is only available if an optional RS-422 or 20mA Current Loop interface has been
installed in the printer. If factory installed, the optional interface will be the default selection.
A sample Interface menu is shown below:
Figure 4-8. Interface Menu Example