Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 35)

Maintenance And Troubleshooting 31
7.2 Preventive Maintenance
The TicketPress is designed for harsh environments requires very little preventive maintenance. It is only
suggested that you periodically clear out any excessive paper dust, paying particular attention to cleaning the
ticket. The ticket sensor and surrounding area may be cleaned with a short blast from a can of compressed air.
DO NOT OIL any shafts or bearings. These surfaces are designed to operate without lubrication. Applying any
type of lubrication will cause premature failure and will not be covered by warranty.
The outer case of the printer may be wiped with a slightly dampened if desired.
Figure 7-1. Ticket Sensor