Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 9)

Installation 5
4. Turn the printer on while continuing to hold .
5. When printer beeps, release . The printer will automatically begin to print. Printer displays entering
Self Test . A sample self test printout is shown below.
Figure 2-5. Self Test Printout Example
6. After the self test has completed, the printer will be in Monitor mode and any data received will be
printed in the following format. Insert a new ticket or blank piece of paper if needed.
Figure 2-6. Hex Dump Printout Example
7. To exit the Self Test & Monitor mode, turn the printer off by holding the power button.