Rice Lake TransAct 2.0 - Manual (Page 37)

36
Admin
The left window displays a list of available backups found in the default
drive and directory.
The right window displays the default drive and directory where the
TransAct program was installed (usually c:\transact).
If you are restoring from a diskette click the single down arrow to show a
drop-down box listing available
drives. Select your diskette drive
(usually a:).
Under the destination box is the
directory box. Use this box to select a
different directory.
A list of available backup files on your diskette appears in the box to the left.
Point and click on the file you wish to restore.
Click Backup to begin restoring the backup. A warning appears asking you
to verify the file being stored and asking if you want to erase the current
database:
This restore will undo any changes you have made to the database since the
date “bu041497” was created. Do you have a current backup and are you
sure you want to do this?
Click Yes to continue, or click No to cancel.
Restore Successfully Completed appears at the bottom of the Restore
Backup window once the restore is complete.