Curtis ENABLE 40 - Manual (Page 18)

12 Curtis enAble ® 40-Series Manual, Rev. B
Drive Only (4-button keypad)
The Drive Only keypad has four buttons: On/Off, Horn, Speed Up, and Speed
Down. These four basic buttons are standard on all the keypad versions.
On/Off Button
The Power On/Off button is located at the top of the keypad, above the display.
This button can also be used to lock the chair; see Handcontrol menu, page 24.
Horn Button
Pressing the Horn button sounds the horn. The horn is generally used to alert
nearby pedestrians to the oncoming chair. Beyond this basic function, the
horn can be programmed to provide several other functions: a back-up alarm,
audible feedback for button presses, and an error code beep (see Sound &
Display menu, page 27).
Speed Down and Speed Up Buttons
The Speed Down and Speed Up buttons are used to select the speed mode.
Pressing the Speed Down button selects the next lower speed mode each time
it is pressed, while pressing the Speed Up button selects the next higher speed
mode. The speed modes function like incremental positions on a variable speed
pot.
Fig. 8a Keypad for basic
Drive Only handcontrol;
these buttons are standard
on all the keypads.
3 — USER HANDCONTROL