Curtis ENABLE 40 - Manual (Page 23)

17 Curtis enAble ® 40-Series Manual, Rev. B
On/Off Button Mode Button
Mode LED Battery LED
Actuator LEDs
(Seat Back)
(Seat)
(Left Leg)
(Right Leg)
Joystick
4 — ATTENDANT CONTROL
4
ATTENDANT CONTROL
(1742)
The attendant control is a compact joystick module that allows an attendant
to control the drive and seat functions while walking behind at a comfortable
pace. It has direct seat control access and easy-to-read BDI, Mode, and Actua-
tor indicator LEDs.
Fig. 10 Attendant control
module.
JOYSTICK
The joystick allows the attendant to control the chair’s speed and direction of
travel when the attendant module is in charge; see section below on precedence
relationship between the handcontrol and the attendant module.
KEYPAD
The keypad has two buttons: an On/Off button and a Drive/Actuator Mode
button.
The Mode button is multi-functional. When the system powers up it will
enter Drive mode, and the Mode LED will be lit green or amber (depending on
which Drive mode was last active). Drive speed is limited by Attendant Speed
1 or 2 (see Speed Mode menu, page 25). A short press on the Mode button
toggles between Attendant Speed Modes 1 and 2.