Curtis ENABLE 40 - Manual (Page 63)

Curtis enAble ® 40-Series Manual, Rev. B A-5 A-1
Fig. B-1 Curtis 1311
handheld programmer.
APPENDIX B: 1311 PROGRAMMER
APPENDIX B
Curtis 1311 HANDHELD PROGRAMMER
The Curtis 1311 handheld programmer provides programming, diagnostic,
and test capabilities for the enAble
® 40-Series Powerchair Control System. The
programmer plugs into the 5-pin connector on the user handcontrol; power is
supplied by the powerbase. The unit consists of an LCD display, rocker-type
keys for navigating through the display and for modifying parameters (+/-),
and three keys that can be used as bookmarks.
Multiple versions of the 1311 programmer are available, each of which can
adjust the parameters at its own access level and below. A Dealer programmer,
for example, can adjust all the Dealer, Service, and User access parameters, but
not the OEM access parameters.
B-1