Curtis ENABLE 40 - Manual (Page 33)

27 Curtis enAble ® 40-Series Manual, Rev. B
5 — PROGRAMMABLE PARAMETERS: Sound & Display and Charger Inhibit Parameters
The parameters in the Handcontrol Inhibit menu allow the actuator func-
tions to remain active (i.e., inhibit Off) while the charger is plugged into the
handcontrol. One or both actuators can be halted in either, both, or neither
direction. Setting an Inhibit to Off allows that specific movement (such as tilt
forward) during charging.
The chair’s drive functions are disabled automatically when the charge
inhibit input is pulled to ground.
SOUND & DISPLAY MENU
PARAMETER RANGE DESCRIPTION
Rev Beep On/Off Provides a backup alarm when the chair is in reverse.
Command Beep On/Off Provides a short beep each time a button is pressed.
Error Beep On/Off Provides a beep when errors are present.
Backlight Day 0–100 % Sets the brightness of the LCD display backlight when the running
lights are off.
Backlight Night 0–100 % Sets the brightness of the LCD display backlight when the running
lights are on.
HANDCONTROL INHIBIT MENU
PARAMETER RANGE DESCRIPTION
Halt Act 1 Dir- On/Off Actuator 1 will be halted in the negative direction.
Halt Act 1 Dir+ On/Off Actuator 1 will be halted in the positive direction.
Halt Act 2 Dir- On/Off Actuator 2 will be halted in the negative direction.
Halt Act 2 Dir+ On/Off Actuator 2 will be halted in the positive direction.