CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 20)

9145E NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
10
3.1 IP/SNMP Agent Configuration
The IP/SNMP Agent Configuration menu (Figure 3-2) configures the Management IP, Test IP, and Auxiliary
IP settings; and is used to add, edit, or delete Host Table and Trap Table entries.
The Management IP, Test IP, and Auxiliary IP Addresses are used for managing and conducting testing on
a TCP/IP network.
Figure 3-2 IP/SNMP Agent Configuration Menu
3.1.1 Management IP Configuration
The Management IP Configuration menu (Figure 3-3), is used to configure the IP manager of the 9145E,
including the subnet mask and gateway. It is also used to configure which ports can be used for
management access. See your network administrator for information and help with determining the
appropriate parameters.
1. Manager IP Address - Used to set the 9145E Manager IP Address.
Subnet Mask - Used to set the 9145E Manager IP Subnet Mask.
Default Gateway - Used to set the IP Address of the Default Gateway.
2. Manager Port - Used to select the port(s) to allow Management Communication access. Options
include: Both User and Net Ports, Net Port Only, User Port Only, Management UTP Port Only, or No
Ports Allowed.
3. Manager VLAN Tagging - Used to enable or disable the use of a Management VLAN. The tags
are 802.1Q compliant with an ether type of 0x8100. The default setting is set to 0 (No VLAN Tag).
4. Manager VLAN ID - When Manager VLAN Tagging is Enabled, this is used to set VLAN Tag ID
between 0 and 4094. The default settings is 0.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V01.00 F121 11:22:37
-------------------------------IP/SNMP AGENT CONFIGURATION---------------------
1) Management IP Configuration
2) Auxiliary IP Configuration
3) Host Table
4) Trap Table
Select [1-4]:
------------------------------------Messages-----------------------------------