CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 58)

9145E NID Software User’s Manual Port Information
Link Status
48
5.1 Link Status
Link Status informs you of the current link status of the User, Network, and Management UTP
ports of the 9145E and provides information on User and Network Port SFP transmit (Tx) and
receive (Rx) power. From the Port Information screen (Figure 5-1), select Link Status (1) and
press Enter. The Link Status screen (Figure 5-2) opens. Press Esc to return to the Port
Information screen.
Figure 5-2 Link Status Screen
5.2 Port Configuration
Use the Port Configuration functions to obtain hardware information, view and modify the
functional and VLAN configurations, manage the various port filters, and to add, delete, and edit
port based VLAN controls.
At the Port Information screen (Figure 5-1), select Port Configuration (2) and press Enter. The
Port Configuration screen opens. The following paragraphs describe each item on the Port
Configuration menu. Press Esc to return to the Port Information screen.
5.2.1 Hardware Information
The Hardware Information screen (Figure 5-4) provides 9145E hardware information such as
Model number, hardware revision, and serial number for the 9145E.
To review hardware information, select Hardware Information (1) from the Port Configuration
menu. This is an informational screen only.
Canoga Perkins Corp. Ethernet Network Interface Device 23-APR-2009
Model 9145E-404-8-0 V01.00 F506 11:03:29
----------------------------------LINK STATUS----------------------------------
User Port Link Up
Network Port Link Up
MGMT UTP Port Link Up
SFP Status:
User SFP Rx Power N/A
User SFP Tx Power N/A
Network SFP Rx Power No Power
Network SFP Tx Power No Power
Press ESC to return to previous screen
------------------------------------Messages-----------------------------------