CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 98)

9145E NID Software User’s Manual 802.3AH OAM
OAM Event Log
88
9.5.2 Display Filter Configuration
The Display Filter Configuration screen (Figure 9-8) allows you to turn the Master filter on or off, and also
to show or hide the location, port, and type filters.
1. To change the Master Filter setting, type 1 and press Enter. Use the Space Bar to select On or
Off. Press Enter to accept the setting. Press Esc to return to the Event Log Display screen.
2. To change the Location, Port, and Type filter settings, type the number for the specific filter and
press Enter. Use the Space Bar to select Show or Hide. Press Enter to accept the setting.
3. To set all of the Location, Port, and Type filter settings to Show, type 15 and press Enter.
4. To set all of the Location, Port, and Type filter settings to Hide, type 16 and press Enter.
Figure 9-8 Display Filter Configuration Screen
Canoga Perkins Corp. Ethernet Network Interface Device 24-APR-2009
Model 9145E-404-8-0 V01.00 F506 10:31:40
------------------OAM EVENT LOG DISPLAY FILTER CONFIGURATION--------------------
1. Master Filter: Off
Location Filters: 2. Local: Show
3. Remote: Show
Port Filters: 4. User: Show
5. Network: Show
Type Filters: 6. Errored Symbol Period: Show
7. Errored Frame: Show
8. Errored Frame Period: Show
9. Errored Frame Seconds: Show
10. Organization Specific: Show
11. Link Fault: Show
12. Dying Gasp: Show
13. Critical Event: Show
14. Show All
15. Hide All
Select[1-15]:
------------------------------------Messages-----------------------------------