CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 87)

Software Upgrade 9145E NID Software User’s Manual
Get Software Upgrades with TFTP
77
8.4 Get Software Upgrades with TFTP
Software can be downloaded from the Canoga Perkins web site to your TFTP server. After downloading
the software, move the file to a known directory to which your TFTP server has access.
To download the latest version from your TFTP server to the 9145E, from the Software Upgrade menu
(Figure 8-1) type 4 and press Enter. The TFTP Upgrade screen (Figure 8-2) will appear.
Figure 8-2 TFTP Software Upgrade Screen
1. Enter the IP Address of the Host TFTP server or press Enter to accept default address.
2. Enter the file name of the software you want to download and press Enter.
a. Type Y and press Enter to begin the download. Progress can be viewed in the message
line.
b. Type N and press Enter to cancel the download and return to the Software Upgrade screen.
3. When the download is complete, press Enter to return to the Software Upgrade screen. The new
software version should appear in the Inactive Firmware field. If Swap Bank after download and
reset was set, the message: Loads xx.xx on Next Reset will appear on the message line.
Canoga Perkins Corp. Ethernet Network Interface Device 23-APR-2009
Model 9145E-404-8-0 V01.00 F506 16:46:42
----------------------------------TFTP SOFTWARE UPGRADE------------------------
Time Since Last Restart 3 days 01:35:22
Host IP Address : 172.16.2.40
Save in Non Volatile RAM? : Y
File Name: 9145e-a-10a02-00.zip
File transfer to unit now ? Y
TFTP transfer in progress.../
------------------------------------Messages-----------------------------------