CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 37)

System Configuration 9145E NID Software User’s Manual
System Information
27
3.4.3 Delete an Account
NOTE: An account cannot be deleted while the user is logged in. In addition, you
cannot delete the last supervisor account.
Before attempting to delete an account make sure the user is logged out. Use the following procedure to
delete an account.
1. Select Delete (D) and press Enter. The first User Account will be highlighted.
2. Use the Space Bar to scroll through the user names to select the account.
3. When deletions are completed, press Esc to return to the System Configuration menu.
3.5 System Information
The System Information screen is used to add or edit administrative and circuit information, such as the
name of the 9145E, contact, location, customer, circuit, equipment codes and Common Language
Equipment Identification (CLEI) information.
System Name, Contact, and Location are the same as the MIB-II variables sysName, sysLocation,
sysContact.
1. From the System Configuration menu, select System Information (5) and press Enter. The System
Information screen (Figure 3-17) opens.
2. Type the number of the parameter to enter information about, then press Enter.
3. Type in new information or edit existing information.
4. To return to the Main Menu, press Esc. When finished, use Enter to save the settings, then Esc to
return to the System Configuration menu.
Figure 3-17 System Information Screen
Canoga Perkins Corp. Ethernet Network Interface Device 21-APR-2009
Model 9145E-404-8-0 V01.00 F506 11:20:13
------------------------------SYSTEM INFORMATION-------------------------------
1. System Name :
2. Contact :
3. Location :
4. Customer :
5. Information :
:
6. Circuits :
:
7. Service Code :
8. Date-in-Service :
9. Date-Out-of-Service :
10. Equipment Type :
11. Equipment Code :
12. Vendor : Canoga Perkins
13. CLEI :
14. Mfg Date : 08/01/2008
Select [1-14]:
------------------------------------Messages-----------------------------------
-