0 diagnostic functions, Diagnostics, Chapter 4 diagnostics – CANOGA PERKINS 9145E Standard NID Software Version 1.0 User Manual
Page 45
Diagnostics
9145E NID Software User’s Manual
35
4.0 Diagnostic Functions
From the Main menu (Figure 2-3), select (2) Diagnostics menu. The Diagnostics menu (Figure 4-1) opens.
The Diagnostics functions to set up loopback, VLAN loopback, latency and jitter testing, cable diagnostics,
PING tests and Network Performance, are configured and initiated here. The following paragraphs
describe each item on the Diagnostics menu.
Figure 4-1 Diagnostics Menu
NOTE: If you enter 6 and the unit is not licensed for PM or SAM, access will be
denied.
Canoga Perkins Corp. Ethernet Network Interface Device 21-APR-2009
Model 9145E-404-8-0 V01.00 F506 16:23:25
--------------------------------------DIAGNOSTICS------------------------------
1) Loopback Setup
2) Latency/Jitter Test
3) PING Generation
4) VLAN Loopback
5) Cable Diagnostics
6) Network Performance
Select [1-6]:
------------------------------------Messages-----------------------------------
Chapter 4
Diagnostics