CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 60)

9145E NID Software User’s Manual Port Information
Port Configuration
50
5.2.2 Functional Configuration
From the Port Configuration menu, select the Functional Configuration (2) and press Enter. The
Functional Configuration screen opens. The Functional Configuration screen (Figure 5-5)
displays the User and Network port speed and duplex information, and allows the customer to
set the functions listed below.
Figure 5-5 Functional Configuration Menu
1. User Port Connector - This setting controls whether the User Port UTP or SFP connector is
active, regardless of what is physically connected. The Spd LED will blink once a second over the
active connector if it is empty.
Use the Space Bar to cycle between the SFP and UTP connector.
2. User Port Setting - This sets the speed/duplex for the User Port and allows the port to be
disabled.
If UTP is selected as the connector, use the Space Bar to cycle between 10M Half, 10M Full, 10M
Auto, 100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/1000 Auto, and Disabled.
If SFP is selected as the connector the speed setting is defined by the SFP. Use the Space Bar to
cycle between the available options.
3. Net Port Connector - This setting controls whether the Network Port UTP or SFP connector is
active, regardless of what is physically connected. The Spd LED will blink once a second over the
active connector if it is empty. Use the Space Bar to cycle between the SFP and UTP connector.
4. Net Port Setting - This sets the speed/duplex for the Network Port and allows the port to be
disabled.
If UTP is selected as the connector, use the Space Bar to cycle between 10M Half, 10M Full, 10M
Auto, 100M Half, 100M Full, 1000M Full, 1000M Auto, 10/100/1000 Auto, and Disabled.
If SFP is selected as the connector, the speed setting is defined by the SFP that has been
inserted. Use the Space Bar to cycle between the available options.
Canoga Perkins Corp. Ethernet Network Interface Device 23-APR-2009
Model 9145E-404-8-0 V01.00 F506 11:07:42
----------------------------------FUNCTIONAL CONFIGURATION---------------------
User Port Speed/Duplex Link Down
Net Port Speed/Duplex 100M/Full
1) User Port Connector UTP
2) User Port Setting 10/100/1000M Auto
3) Net Port Connector UTP
4) Net Port Setting 10/100/1000M Auto
5) RMTF Disabled
6) GigE RMTF Mode Both Ports CP Proprietary
7) LLF Disabled
8) Flow Control Disabled
9) Maximum Frame Size 10000
Select [1-9]:
------------------------------------Messages-----------------------------------