CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 75)

System Alarms & Logs 9145E NID Software User’s Manual
65
6.0 System Alarms
Use the System Alarms Screen to view alarms and faults on the 9145E.
To view alarm status, select System Alarms (4) from the Main Menu and press Enter. The System Alarms
Screen (Figure 6-1) opens. Press Esc to return to the Main Menu.
Figure 6-1 System Alarm Screen
Canoga Perkins Corp. Ethernet Network Interface Device 23-APR-2009
Model 9145E-404-8-0 V01.00 F506 14:25:21
-------------------------------------SYSTEM ALARMS-----------------------------
Link Remote Fault SFP Transmitter
User Port *** Down *** N/A N/A
Network Port Up N/A Failure
Link Loss Fwd User->Net No
Link Loss Fwd Net->User No
48V DC Power Supply A Status OK 5.25 Volts Output (4.83 < OK < 5.49)
48V DC Power Supply B Status OK 5.25 Volts Output (4.83 < OK < 5.49)
Main Board Voltages All mainboard voltages OK
Temperature Status OK 34.0C (-40.0C < OK < 85.0C)
Hit 'ESC' to return to previous menu
------------------------------------Messages-----------------------------------
Chapter 6
System Alarms & Logs