Basic operating procedure, How to mute the volume, Press muting on the remote control – Panasonic SC-CH60 User Manual
Page 17: How to use headphones, 3 start the sound source, 4 adjust the volume level, Reduce the volume level, Connect the headphones to the headphones jack, How to mute the volume how to use headphones
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operating Procedure
1
Press POWER STANDBY
CD /ON to switch on
the power.
2
Select the sound source by pressing TAPE, CD
or TUNER.
The display panel will show which source has been selected.
How to mute the volume
Press MUTING on the remote control.
MUTING
The muting indicator appears on the display.
This lowers the volume level by 20 dB (approximately Vio).
How to use headphones
3
Start the sound source.
4
Adjust the volume level.
Note:
Before you set the system to the standby mode, be sure to reduce the
volume level to prevent the extremely high output from the amplifier
from damaging the speakers.
To cancel, press MUTING again or reduce the volume level to the
minimum position and then reset to the desired volume.
(not included) ‘
Reduce the volume level.
Connect the headphones to the headphones Jack.
When you connect the headphones, the speakers will automatically
be cut off.
Avoid listening for prolonged periods of time to prevent hearing
damage.
Plug type: Stereo mini
1 7