Panasonic SC-CH60 - Manual (Page 41)

Specify the tape length by one minute.
0) Press T PRESET TUNING or PRESET TUNING
Specify the desired time.
You can specify up to 90 minutes.
(D Press MEMORY/TAPE LENGTH.
A to
After recording side A, the deck will stop auto­
matically. Then press STOP/EJECT to turn over
the tape.
8
Press RECORD for recording side A.
1, After AILS is over, the cassette deck will automatically ad­
vance the tape beyond the leader tape.
2. The CD changer will start a disc play and the edit-recording
will start.
Press RECORD for recording side B.
A non-recorded passage of about 10 seconds will be automati­
cally created, and then the tracks reserved on tape side B will
start playing to be recorded.
Notes:
You can edit-record up to 20 tracks.
The tracks assigned on tape side A
You cannot edit-record the backs numbering higher than 20.
3.
4.
When the tracks specified on tape side A have been played
through, the CD changer will be automatically set to the
pause mode.
The tape will remain in the recording mode (although no
sound is being recorded) and advance to the end of №e tape.
To cancel sequential edit-recordlng
Press STOP/EJECT on the cassette deck and the
stop button on the compact disc changer.
■ST0P/± EJECT
Both deck and changer will stop.
and
About Automatic Tape Level Setting (ATLS)
Since compact discs generally have a wide dynamic range, careful
setting of the recording level is required to achieve optimum recording
results.
This system automatically scans (fast search) for the peak (highest)
level of the entire disc, and the tape deck then sets the appropriate
recording level. During this period, the peak level sound will not be
heard.
It takes about 70 seconds to complete ATLS for a compact disc of
60 minutes.
im
■lb 41