Sequential cd recording (album), 1 press the cd input select button, 2 load a cassette in deck 1 – Panasonic SC-CH60 User Manual
Page 40: 4 press album, Edit-recording from compact discs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Edit-Recording from Compact Discs
Use the edit-recording safeguard to maintain continuity when chang
ing from one side of the tape to the other.
The number of tracks that can be recorded on sides A and B of the
tape is automatically calculated according to the set tape length.
The edit-recording will start after the cassette deck makes a non-
recorded passage of about
10
seconds.
So you don't have to take up the leader tape (the first few revolution)
before recording.
Sequential CD recording (ALBUM)
The number of tracks can be selected sequentially to fit the length of
the tape used.
Q
-1____ 10
1
1
Press the CD input select button.
2
Load a cassette in deck 1.
The normal grade of tape is recommended.
Check to see that the tape’s erasure prevention tabs (see page
53) are intact and the tape is fully rewound.
Use a tape of under 90 minutes.
3
Press OPEN/CLOSE on the CD changer to load
a disc you want to edit.
4
Press ALBUM.
ALBUM indicator will light.
The compact disc changer automatically scans for the peak
(highest) level of the entire disc. (ATLS; See page 41.)
The tuner display shows the tape length.