Memory scanning, If noise is excessive in the fm mode, Press fm mode/bp to monaural position – Panasonic SC-CH60 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^¡ssì
Memory scanning
This feature is convenient when trying to iocate a certain broadcast,
or to monitor each station briefly.
Each frequency can be heard (in sequence) for about 5 seconds.
Press
T PRESET TUNING or PRESET TUNING ▲,
then release when the frequency display begins to
change.
The memory scan indicator will flash.
PRESET TUNING ▲: For higher channel
T
PRESET TUNING; For lower channel
Memory scan indicator
/ /
/ /
1
\ 1 /
— HSCAN— ““
^ 1 ^
FM
/_/
/
=MM
MHz
VOLUME
If noise is excessive in the FM mode
Press FM MODE/BP to monaural position.
FM MODE
/BP
When the broadcast you want to listen to Is found
Press ▼ PRESET TUNING or PRESET TUNING
A.
The broadcast will continue even after 5 seconds.
The FM stereo indicator will go off, showing that the sound will then
be heard in monaural. If the broadcast signal is weak, or if there is a
targe amount of interference, you will get a clearer sound using the
FM MODE/BP button.
23