Panasonic SC-CH60 - Manual (Page 21)

Memory presetting
If you want to preset broadcast frequencies, you can input them into
the unit's memory. You can easily recall any of those broadcast
frequencies by pressing one of the preset-tuning buttons on the
remote controi or by using the preset button (PRESET TUNING).
You can input up to 24 radio stations (12 FM and 12 AM) into the
tuner’s memory.
(When you input a new frequency on a preset channel, the previous
setting for that channel is automatically cancelled.)
1
Press the TUNER input select button.
2
Press BAND to select FM or AM.
3
Tune in your favorite station.
Press MANUAL TUNING until the correct frequency appear on
the display.
4
Press MEMORY to activate the memory indi­
cator.
The memory indicator will flash.
Memory indicator
MAX
\ /
FM
П
и
1 1
/
1
— MEMORY —
^ 1 ^ =M«
MHz VOLUME
5
Press ▼ PRESET TUNING or PRESET TUNING
A to select the desired preset channel while
the memory Indicator is flashing.
PRESET TUNING A: Press to increase (from 1 to 12).
▼ PRESET TUNING: Press to decrease (from 12 to 1).
MAX
П 1
/
и и.
1
I
\ 1 /
— MEMORY —
FM ^ 1.^ =MM
MHz VOLUME
Channel number
6 Press MEMORY.
The memory indicator will go off.
7
Repeat steps 3 through 6 to program station for
each of the remaining channels.
Most-recent-memory
The most-recent-memory system remembers the broadcast station
last tuned to when you switched the power to standby mode or
selected another function. When you switch the tuner back on, the
last station you tuned to will automatically come on.
The programmed frequencies wilt remain In the unit’s memory for
approximately 2 weeks, even if there is an interruption.
21