Panasonic SC-CH60 - Manual (Page 37)

To briefly interrupt recording
Press PAUSE on deck 1.
IIPAUSE
The cassette deck will return to the recording standby mode.
To resume recording, press PAUSE again.
To stop recording---------
Press STOP/EJECT on deck 1 .
■STOP/± EJECT
To use the beat proof function (AM broadcast only)
Press FM MODE/BP on the tuner.
FM MODE
/BP
When recording an AM broadcast, use the beat proof button to
reduce unwanted “beat" signals (whistle). Press the FM mode/beat
proof button to whichever position (BP 1, or BP 2) best reduces these
beat signals. The display will indicate which position is in effect.
To erase a recorded tape (Deck 1)
When you make a new recording on a previously recorded tape, the
new recording will automatically erase what was previously recorded.
To erase a tape without making a new recording, follow the steps on
the right.
reiCK 11 Ena r^k2l
MAX
Ti n 1
=MW
VOLUME
1 DECK 1 ]BHa 1oEdk 21
MAX
n n ~l
J1 1
/_
VOLUME
1) Press the TAPE input select button on the amplifier.
2) Insert the recorded tape Into the cassette holder of deck 1.
3) Press RECORD.
Concerning the leader tape
The term “leader tape" refers to the first few revolutions on a cassette
tape. No recording can be made on this position of the tape. Before
recording, wind the tape to a point just beyond the leader tape.
37