Panasonic SC-CH60 - Manual (Page 47)

5
Select the hour you want the timer to go on.
0 Press TIME + or TIME - to set hour. In this case, set to
7.
~i Press POWER STANDBY /ON to switch to the
standby mode.
TIMEtl
\l/_ -
TIMER
h ± l 1 1 / /■ / / /
. I - J 1 1 1
/ / • / / /
--------------------------\- -------------------- ---------------------------------------
(D Press TIME ADJUST.
The hour indicator will stop flashing and the minute indicator
wiil flash.
6 Select the correct time you want the timer to go
on.
0 Press TIME + or TIME - to set minutes. In this case, set
to 15.
(D Press TIME ADJUST,
The minute indicator wili stop flashing.
The timer play will start at the preset time with volume level increasing
gradually up to the volume level you preset.
Note:
It the power is on, №e timer will not function.
The system must be in the standby mode.
To cancel the timer mode
Press ON TIMER.
ONTtU№
To resume regular play after the timer
setting has been completed-----------------
The timer on time indicator will go out.
The timer play will not occur, but the time ON setting for the timer play
will remain in the unit’s memory.
1. Press POWER STANDBY 0 /ON to switch on the power.
When tape timer play is set, first press STOP/EJECT to release
the pressed playback button (PLAY).
2 . Select the desired listening source.
3. After you’ve finished listening, be sure to press POWER
STANDBY 0 /ON to switch the power to the standby mode.
If setting to the tape timer play, press PLAY in succession.
Even if you change the volume level or music source, the timer play
will start as previously set.
47