Panasonic SC-CH60 - Manual (Page 46)

Using the Timer
Setting the timer piay —
You can use this timer function to program the system to play a
desired sound source at a desired time and switch to the standby
condition after 60 minutes.
[ looT
0
0 - L - . . J O
1 Г. / t -
III 1' ^
POWER
STANDBY6/0N
Have you read and compieted “Setting the Time of
Day“ on page 18? If not, please complete these
sections before continuing.
The following example shows how to set the timer play function for
listening from 7:15. (The system will automaticaily switch to the
standby condition at 8:15.)
Switch on the power.
1
Press one of the input select buttons to select
the desired sound source.
For timer play on the CD changer:
Press the CD input select button.
You can use timer play.
For timer play on the tuner:
Press the TUNER input select button, select the desired band,
and tune in a station.
For timer play on the tape:
Press the TAPE input select button.
After step 7, press PLAY on whichever deck you want to play.
Note:
You can activate the timer play on the external unit.
Press the AUX input select button and operate the external unit.
2
Set the volume level for timer play.
10ЁСК 11 1DECK 21
Г П 1 Ti
MAX
и и и ±1
VOLUME
3
Press ON TIMER.
4
Press TIME ADJUST.
The timer indicator will appear.
The 0 will start flashing.
Timer indicator