To confirm the time remaining on the sleep timer, Press sleep, To cancel the sleep timer mode – Panasonic SC-CH60 User Manual
Page 51: To use the sleep timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To confirm the time remaining on the sleep timer
{Also available from the remote control)
After the display shows the mode display:
Press SLEEP.
SLEEP
The display will show the time remaining on the sleep timer for
approximately 5 seconds.
To cancel the sleep timer mode-------------
(Also available from the remote control)
Press the power switch to put thp system in
standby mode or press SLEEP until ti^e sleep timer
indicator disappears.
POWER
STANDBYÓ/ON
SLEEP
or
To use the sleep timer in conjunction with
the timer play or timer recording operation
For example, to go to steep listening to a radlrjt broadcast, and
wake up the next morning listening to a compajct disc.
1) Set the timer for the timer play.
(See steps
1
to
6
on pages 46-47.)
2) Press POWER STANDBY (!) /ON. This will swjtch the system to
the standby mode.
3) Press SLEEP and set the desired time for the s eep timer.
This will switch the power on, and the sleep timer indicator will
light.
4) Tune in your desired band and station, and ^djust the volume
level.
!
51