Panasonic SC-CH60 - Manual (Page 36)

Making a Recording
(Deck 1 only)
To record from the desired source---------------
To make a tape-to-tape recording, see “Tape-to-Tape Recording" on
Switch on the power.
1
Press STOP/EJECT on deck 1 to load a cas­
sette.
The normal grade ot tape is recommended.
Check to see that the tape's erasure prevention tabs (see page
53) are intact, and then insert the cassette into deck 1.
You cannot record on the leader tape (the first few revolutions)
so take up the leader tape in advance (See page 37.)
2
Press the Input select button to select your
desired sound source.
To record from the radio:
Press TUNER.
Then tune in the desired station. (See pages 19-23.)
To record from compact discs:
Press CD.
To record from the external unit:
Press AUX.
Pross RECORD.
The recording will begin.
The unit has been set for the optimum recording level.
After pressing RECORD, the cassette deck will automatically
start the recording from the first track. (Synchro start funo
tion)
So you don't have to press the CD play button.
Note:
You can record programmed tracks from more than one disc (up
to 3). The cassette deck wilt create a non-reoorded passage of
about 4 seconds each time that the CD changer changes discs.
Notes:
The graphic equalizer effects will not be recorded.
Do not use the input selectors while a recording is in progress,
because the sound source will be changed.