Appendix – Steffes 6140 User Manual

Page 25

Advertising
background image

Appendix

Comfort Plus Commercial

Appendix

n

A.01

Appendix

A

Note 1: 208V or 240V systems are factory configured to be field connected to multiple, single phase line

voltage circuits. If single feed to element and blowers/system controls circuit is desired, an optional

single feed kit is available to order. Connection to 3-phase power is acceptable and can improve

phase balancing.

Note 2: Because 277/480V and 347/600V systems are configured for single feed, three phase line voltage

connections only, a step down transformer must be field installed.

Note 3: The size and heating ability of the system required for an installation is dependent on the heat loss

of the area and hours available for charging. In addition, if the system is not installed within the

heated area, heat lost statically must be taken into account when sizing. Contact Steffes Corpora-

tion for assistance in selecting an appropriately sized system.

Note 4: The indoor coil or outdoor compressor of an air conditioner or heat pump are not included with the

furnace. A return air plenum for the 6140 is configured to house an indoor coil and can be ordered

from the factory as an optional accessory. Dimensions listed are that of the inner coil area in the

plenum. For larger coils, field provisions to the factory built plenums are necessary or one will

need to be custom built by the installer. (In heat pump applications, the indoor coil MUST be

placed on the return air side.)

SPECIFICATIONS

Model 6140

Input

Voltage

208 240 277/480

347/600

Phase Single

Three

Number of Wires - See Note 1

2

4

Charging Input (kW)

36

36

42.75 38.4 46.5 36 46.5

Element

Current

Draw

(Amps)

174 150 179 47 56 35 45

Pump/Blower/Controls Max Circuit Required (Amps)

7 @ 240 Volts

Single Feed Minimum Circuit Ampacity (Amps) -
See Note 1 & 2

226 197 232 63 75 47 60

Blower/Controls Voltage (VAC) - See Note 2

240/208

Storage Capacity - See Note 3
kWh
BTU

240

818,880

Approximate Installed Weight (lbs)

3,859

Max Coil Dimensions (W x D x H) - See Note 4

26” x 22” x 30 15/16”

Advertising
This manual is related to the following products: