ChemoMetec SCC-100 - Manual (Page 30)

4 Installation and Start-up
18
The start-up display shows the version number and date (year-month-date) of the
internal software of the NucleoCounter in line 3 (“v4.XX” in Figure 8). The serial number
of the instrument is shown in line 4 in the display (“002-01” in Figure 8).
After a successful start-up the display changes (Figure 9) and the status indicator on the
keyboard panel turns green.
NucleoCounter
Ready
Figure 9. The NucleoCounter is ready for cell counting
If the instrument has performed as described above, it is ready for use. If the
instrument displays an error message at start-up please refer to chapter 7.
4.1.2 Shutting down
Pressing the “On/Off” button shuts down the NucleoCounter and while the instrument
shuts down, the display will momentarily look as shown in Figure 10.
Bye. . .
Figure 10. The shutdown display .
4.2 Installation of SomaticView
Regarding installation of the optional SomaticView PC-software, please refer to the
SomaticView User’s Guide.