ChemoMetec SCC-100 - Manual (Page 48)

8 Technical specifications
36
Other environmental operating conditions for the NucleoCounter
Indoor use only.
Altitude Up to 2000 m.
Mains supply
Refer to the specifications for the Power supply in section 9.2
Power supply.
INSTALLATION CATEGORY II (Refer to UL 61010A-1)
OVERVOLTAGE CATEGORY II (Refer to UL 61010A-1)
POLLUTION DEGREE II (Refer to UL 61010A-1)
8.2 The SCC-Cassette™
Reagent Each SCC-Cassette contains approximately 2,8 µg propidium
iodide.
Storage Store the SCC-Cassettes in a sealed foil bag at max. 30°C.
Stability See documentation delivered with the SCC-Cassettes.
8.3 EMC/EMI standards
The NucleoCounter SCC-100 complies with EMC/EMI standards as follows.
EN61326: 1997+A1: 1998 (Class B) +A2: 2000, Electrical equipment for measurement,
control and laboratory use – EMC requirements (emission and immunity). Annex B and C
from A1: 1998 is used.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.