Hangar 9 35% Extra 300 ARF (3 Boxes) User Manual
Page 33
33
35% Extra 300 ARF Assembly Manual
Cowl Mounting
Required Parts
Cowl
Fuselage
(6) 4-40 screws, washers and lock washers
Required Tools and Adhesives
3/32-inch ball driver
1. The cowl is secured at the top and the bottom. There
are four 4-40 screws inserted through the inside of the
fuselage. First the lock washer goes on the screw then the
flat washer.
2. The bottom two 4-40 screws are inserted through the
lower sides of the cowl.
Pilot Installation
Required Parts
Canopy
Pilot
Required Tools and Adhesives
3/32-inch ball driver
Threadlock
Alcohol swab
Shoo Goo
1. Take the screws that hold the pilot head to the body
out and apply threadlock to them and re-tighten.
2. Lightly sand the underside of the shoulders to scuff
the paint and clean the mounting shoulders of the pilot with
alcohol swabs.