Applying decals – Hangar 9 35% Extra 300 ARF (3 Boxes) User Manual
Page 38
Advertising
38
35% Extra 300 ARF Assembly Manual
Applying decals
The model comes with decal sets and all decals are die-cut. All large decals should be applied wet so the bubbles can be worked out by squeegee. Allow 24 hours for decals to dry and
adhesive to set.
It is important to take all the wrinkles in the covering out and would be best to apply the decals after the plane has been taken to a flying field a couple of times and all the wrinkles have
been removed. The following pictures show the location of decals.
Advertising