Hangar 9 35% Extra 300 ARF (3 Boxes) - Manual (Page 35)

35 35% Extra 300 ARF Assembly Manual
 2. Glue opposite side of the hook and loop to the tray.
 3. Mount the receiver and secure it with a piece of hook
and loop strap.
 4. Remove the covering to mount the soft switch. There
are 3 different size switch mounts on each side of the
fuselage.
 5. Apply a drop of threadlock on the switch mounting
screws and mount the switch.
 6. Throttle servo regulator is mounted next to the receiver
using two pieces of hook and loop similar to receiver
installation except it does not need foam.
 7. Run a 24-inch servo extension from throttle servo to
the regulator and a 3-inch extension from the regulator to
the receiver unit.