Hardy HI LPRE05 Shear Beams - Manual (Page 7)

OPERATION AND INSTALLATION MANUAL
Page 1
Congratulations, on your purchase of the Hardy Process Solutions
Load Point Assembly. This product, is engineered to set a new stan-
dard in load point assemblies. Hardy combined new innovations with
previously extra cost features and just plain common sense features
and provided you with optimum performance unequaled anywhere.
General Information The Hardy HI HLPS Hermetic Load Point System
provides accurate output in the most demanding
applications. The load sensor performance exceeds
IP68 and NEMA 6 Standards for Wash Down Resis-
tance.
Use the HI HLPS Free Sliding Load Point System for
medium capacity vessels. The pre-assembled Free
Sliding Load Point System consists of three low pro-
file mount types (See Figs. 1,2,3) that are designed to
eliminate the effects of unwanted forces and resulting
in exceptional load measuring accuracy.
Each load point consists of a stainless steel load sen-
sor which is hermetically sealed (gauge area and cable
entry), Enhanced C2
®
Second Generation Calibra-
tion, matched mV/V and mV/V/Ohm and a 1/4 inch
conduit adapter. The load points are pre-assembled at
our factory, eliminating any assembly in the field.
Each load point is fitted with a grounding strap and
anti-lift-off protection. The load points mounting
hardware is available in either stainless or galvanized
steel.