Cleaning the shuttle race and feed dogs, Oiling the machine – Kenmore 385.160201 User Manual
Page 104
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cleaning the Shuttle Race and Feed Dogs
|j] Unpiug the machine and remove the presser foot and
needle. Open the face cover to allow room to remove the
needle plate screw with a screwdriver. Remove the needle
plate(T) and take out the bobbin.
(T) Needle plate
] Lift up the bobbin holder(2) and remove it.
(2) Bobbin holder
] Brush out dust and iint inside the bobbin holder. Clean
the feed dogs(3)and hook race (4) with a lint brush. Wipe
out gently with a soft, dry cloth.
(D Feed dogs
(4) Hook race
0] Line up the triangle marks(5) and position the bobbin
holder, so that the notch fits next to the stopper(6) in the
hook race.
(5) Line up the triangle marks.
{|) The notch fits next to the stopper.
0
Oiling the Machine
Unplug the machine. Open the face cover and oil the two
points, as shown, at least once a year. One or two drops of
oil is sufficient. Remove excess oil, otherwise it may stain the
fabric. In case the machine has not been used for a long
period, oil it before sewing. Use quality sewing machine oii.
96