Kenmore 385.16231 - Manual (Page 66)

Monogramming
(T) stitch selector:
(D
Stitch
width:
(D Stitch length:
0 Needle thread tension:
(5) Presser foot F:
(D Pressure adjusting lever:
5
3
0.5 to 1
1 to 4
Satin stitch foot
1 or 2
Applique
© stitch selector:
@ Stitch width;
@ Stitch length:
0 Needle thread tension;
® Presser foot F:
© Pressure adiusling lever:
Baste appligue pieces on the fabric^ or fuse the appligue
pieces With an Iron-on fabric Joiner, Stitch around the
applique, making sure the needle fails along the raw edge
of the applique.
Attach a piece of stabilizer on the wrong side {Bottom side)
of the fabric.
Draw letters on the fabric with tailor’s chaik. Form each
pattern with a satin stitch, adjusting the stitch width.
9
6.5
Goid stretch stitch position
2 to 6
Satin stitch foot
2
0
J
NOTE:
Maximum stitch width for pattern #9 is 1 4" (3.5 mm)
when setting the stitch width controi at 6.5.
J
“0
54