Compaq GS320 - Manual (Page 179)

Compaq AlphaServer Partition Manager 9-15
at least one CPU, 64 Mbytes of memory, and an I/O riser module that is
connected to a master PCI box with a standard I/O module. The partition
shown in Figure 9–7 does not yet have a connection to a PCI box with a
standard I/O module. In Figure 9–8 this is resolved by adding QBB 7 to the
partition. The message below the Total block now indicates that the hardware
requirements for a partition have been met.
NOTE: You can add an unpowered QBB to a partition if that partition
already has at least one QBB that is powered and if the hardware
requirements for a valid partition have been met. Memory in the
unpowered QBB cannot be seen until the QBB is powered on.
Figure 9–8 Add/Modify Hard Partition Screen