Compaq GS320 - Manual (Page 96)

7-2 SMC Installation and User's Guide
7.1 Logging on to the SMC
Logon is automatic if the administrator account has no password. For
manual logon, a different account can be used, or the administrator
account can be given a password.
Figure 7–1 Windows NT Security Window
The SMC system is configured to log on to the administrator account
automatically when it powers up. If you leave the administrator account with
the default configuration (that is, without a password), you can log on to
another account by following these instructions.
1. Close all applications.
2. Press Ctrl+Alt+Del. The Windows NT Security window displays (Figure 7–
1).
3. Click Logoff… . A window displays with the message “This will end your
Windows NT session.”
4. Click OK and immediately depress and hold the Shift key. Hold this key
until the Log On dialog box displays.
5. Enter a username and password that are valid for this system. Click OK.