Compaq GS320 - Manual (Page 51)

Connecting the SMC in a System with One Serial Console Line 4-9
1. From the Start button select Settings|Control Panel.
2. In the control panel, double-click the Ports icon. The Ports dialog box
displays (Figure 4–6).
3. Select COM1 and click the Settings… button. The Settings for COM1 dialog
box displays (Figure 4–7).
4. If the baud rate displayed is not 9600, change it to 9600. Set the Data Bits
to 8, Parity to None, Stop Bits to 1, and Flow Control to XON/XOFF. If these
settings are not compatible with your environment, change them to settings
that are.
Figure 4–7 Settings for COM1 Dialog Box