Compaq GS320 User Manual
Page 247
Advertising
Installing a Terminal Server in a GS160/320 System
B-5
1.
Position the holes in the bracket (indicated by
in Figure B–3) over the
alignment pins (
) on the terminal server tray. The front end of the
bracket should be 2 inches (5 cm) from the front of the terminal server.
(The front is the face that has the port connectors.)
2.
Fasten the bracket to the terminal server with the M5 screws (
).
3.
Repeat with the bracket on the other side.
Advertising