Compaq GS320 - Manual (Page 81)

Configuring the SMC Software 5-29
1. In the Access Server dialog box, select the Utilities tab (Figure 5–22). Select
Test Connection. Click the Do It Now… button. The message “Access Server
connection test successful” displays. Click OK.
2. Select Connect to Telnet Console. Click the Do It Now… button. The Telnet
window displays (Figure 5–23).
3. At the Local> prompt type show server . A snapshot of the server displays.
This confirms the connection.
4. Close the Telnet window.
Figure 5–23 Telnet Window