Compaq GS320 - Manual (Page 36)

3-6 SMC Installation and User’s Guide
3.3 Cable the Terminal Server to the GS80/160/320
For PCI boxes in an expander cabinet, make the cable connection to
the terminal server. Then record the connections in the table provided
and dress the cables.
3.3.1 Make the Cable Connection
Cable the local port of the PCI box to the appropriate port on the
terminal server with a BN25G cable.
Figure 3–5 Local Port Location
PK-1724-00
1
The cable connections are made at the factory from the standard I/O modules in
PCI boxes in the GS160/320 power cabinet and in the GS80 cabinet. For PCI
boxes in expander cabinets, an H8585–AA connector (12–36054–01) is installed
on the local port (
in Figure 3–5) and a BN25G cable (17–03212–05) is labeled
and attached at the factory.
Make the connection to each console (PCI box with a standard I/O module) in an
expander cabinet. Follow the cabling chart in Table 3–1, and attach the BN25G
cable to the port on the terminal server (
in Figure 3–6).
Table 3–1 shows the suggested cabling for master PCI boxes only. This
numbering matches the default SMC setup. Secondary boxes (if there are any)
can be cabled to unused terminal server ports.