Compaq GS320 User Manual
Page 45
Connecting the SMC in a System with One Serial Console Line
4-3
1.
Set up the Compaq Deskpro computer and monitor according to the
accompanying instructions.
2.
Start the SMC system. As the system software loads, enter information
when requested: user name, company name, product ID, and system name.
See the AlphaServer GS80/160/320 System Management Console
Installation and Release Notes for instructions.
3.
Check that the keyswitch on the GS80/160/320 system is turned to Off (
in
Figure 4–1 points to the Off position) and then turn on the breakers on the
AC input boxes. The breakers are accessible from the rear of both the GS80
cabinet and the GS160/320 power cabinet. Then make the cable connection
described in Section 4.2.
4.
When the operating system software has finished loading, log on to the SMC
system using the administrator account. (For the password, press the Enter
key.)
5.
Optionally, change the password for the administrator account.
a.
Press Ctrl+Alt+Del. The Windows NT Security window displays (Figure
4–2).
b.
Click the Change Password… button. The Change Password dialog box
displays.
c.
Enter the old password and the new one, and confirm the new password.
Click OK.
6.
Check the version of the SMC software by double-clicking the Version icon:
If the version is not 3.1, or if the desktop does not have a Version icon,
update the software. Refer to the AlphaServer GS80/160/320 System
Management Console Installation and Release Notes for instructions.