Comtrol VS1100 Novell NetWare - Manual (Page 25)

NIAS/MPR Installation and Configuration 25
Novell NetWare
The AIO Board Configuration window displays:
9. Highlight MAC and press Enter.
10. Enter the network address of the VS1000 unit and press Enter.
11. If there are VS1100 units attached to the VS1000, press Enter to
display the list of valid values and select the correct number of
ports.
Note: The number of ports defaults to 16.
12. Press the Esc key.
The WHSMAIO Board Configuration window is displayed, this
time including the board and driver names.
13. If the first AIO port number is not 1, enter the first port number.
14. Enter the number of AIO ports and press Enter.
15. Press the Esc key.
You are asked if you want to save your changes.
16. Select Yes and press Enter.