Comtrol VS1100 Novell NetWare - Manual (Page 39)

Troubleshooting 39
Novell NetWare
Notes on the Use of Trace Types
This table describes the trace types and their definitions:
Printer Configuration
All serial printer configuration is handled through NetWare. See the
Novell documentation for troubleshooting procedures and more
information.
Table 7. VS1TRACE Type Codes
Trace Type Description
INIT Traces the initialization of aiovs1.
ERR
Traces the error conditions. You should trace
only devices that are experiencing problems.
Turn this on any time you are diagnosing a
problem.
LSL
Traces the LSL interface to the Ethernet
Driver.
AIO
Traces the AIO interface. Use caution and make
sure you are tracing only the port experiencing
problems. Use the AIOVS1-level trace only if
nothing is working.
PORT
Traces the port activities between the server
and the InterChangeVS 1000, such as signal
changes, modem status changes, and so on.
HDLC
Traces the exchange of packets between the
server and the InterChangeVS 1000.
ADM
Traces the administrative activity between the
server and the InterChangeVS 1000. This is
mainly used to trace problems with loading a
VS1000.
DATA
This is used to verify that data is being
received/transmitted between AIO and the
InterChangeVS 1000. Use sparingly as it can
cause a lot of traffic.
QUE
Trace data being placed on and off the various
queues.