Press esc to exit to the protocol configuration, Configure other protocols as needed. when you a, From the internetworking configuration menu, se – Comtrol VS1100 Novell NetWare User Manual
Page 30: Press the insert key to add a new binding. the, Select aiovs1 protocol and press enter. you are, Select a network interface and press enter, Configuring bindings
30
NIAS/MPR Installation and Configuration
Novell NetWare
The Miscellaneous Protocol Load Commands window is displayed.
It should contain a line for LOAD AIOVS1.
7.
Press Esc to exit to the Protocol Configuration window.
8.
Configure other protocols as needed. When you are done, press Esc
to exit to the Internetworking Configuration window.
Configuring Bindings
Follow these steps to set the protocol to interface/group bindings:
1.
From the Internetworking Configuration menu, select Bindings.
The Protocol to Interface/Group Bindings window is displayed:
2.
Press the Insert key to add a new binding. The list of configured
protocols is displayed.
3.
Select AIOVS1 Protocol and press Enter. You are asked which
interface you want this protocol bound to.
4.
Select A Network Interface and press Enter.