Move the cursor to modem/dce type and press ent, Select the modem type attached to the port and, Move the cursor up to interface speed and press – Comtrol VS1100 Novell NetWare User Manual
Page 28: Select one and press enter, Press esc to exit the ppp network interface con, Repeat this process as needed for all ports on, From the internetworking configuration menu, se, Press insert to create an entry, Enter the new call destination name and press e, Select one supported wide-area medium (for exam
28
NIAS/MPR Installation and Configuration
Novell NetWare
4.
Move the cursor to Modem/DCE Type and press Enter.
The list of available PPP Modem/DCE Device Types displays:
5.
Select the modem type attached to the port and press Enter.
6.
Move the cursor up to Interface Speed and press Enter.
The list of interface speeds displays.
7.
Select one and press Enter.
8.
Press Esc to exit the PPP Network Interface Configuration screen.
You are asked if you want to save your changes. Select Yes and
press Enter.
You are returned to the Network Interfaces window. The Media
type should be PPP and the port Status should be Enabled.
9.
Repeat this process as needed for all ports on the system. When
you are done, press Esc to exit to the Internetworking
Configuration menu.
Configuring WAN Call Destinations
Follow these steps to create WAN Call Destinations:
1.
From the Internetworking Configuration menu, select WAN Call
Directory.
The list of Configured WAN Call Destinations is displayed.
2.
Press Insert to create an entry.
3.
Enter the New Call Destination Name and press Enter.
4.
Select one supported wide-area medium (for example, PPP) and
press Enter.
The PPP Call Destination Configuration screen is displayed.