Comtrol VS1100 Novell NetWare - Manual (Page 26)

26 NIAS/MPR Installation and Configuration
Novell NetWare
You are returned to the Configured Boards window, and the
VS1000 you just installed is displayed on the list of configured
boards:
17. If you have more VS1000 units to configure, repeat steps 3
through 16 as needed.
18. When you are done, press Esc to return to the Internetworking
Configuration menu.
At this point, the system has automatically added the necessary load
commands to the system startup files. There is no need to edit the
autoexec file manually.
Proceed with the following steps as needed.